Angular/Common Box Stitcher ( Straight Model Available for Smaller Boxes)

Angular/Common Box Stitcher

Regular price Rs. 75,000.00
/

Only -1 items in stock!

 Angular Box Stitcher (ABS) is the most widely used stitcher in Indian and South Asian market. We bring forth the best in class ABS stitchers running today in thousands of corrugation manufacturing unit. 

Straight Model Available for Smaller Boxes. Bottom sealing attachment is also available on order.

Selection of size can be decided on the basis of size of box. Machine is used with flat wire.

Size

20" (510 MM)

30" (765 MM)

36" (915 MM)

42" (1065 MM)

48" (1220 MM)

50" (1270 MM)

60" (1525 MM)

60" (1525 MM)


OPERATION MANUAL

The first essential to good stitching is a clean cut-off. Keep the knives sharp and see that the Cutting Tube is in contact with the Cutting Knife.

CUTTING KNIFE 

This is a rectangular plate having its (our cutting edges. By the change  of  three hole at  the position of one edge: One Cutting Knife can be used twelve times. So it has a Iong life. 

CUTTING TUBE 

The having particularly only one cutting edges made re-grindable. Care must be taken when grinding to see that the hole is the foremost point.

SETTING THE CUT OFF

After adjustment of cutting edge the Cutting Tube should be replaced such that it contacts with the cutting knife. Then clamp up.

Make sure that contact is secured and also that it is not so tight as  to  interfere  with the free movement of the cutting knife under the action of cut-off slide.

THREADING

The path of the wire is between the two strips and third hole of wire guide spring, then under ’two roller fitted with head and over the Roller fitted with slider  with adjusting nut. After that under the Feeder roller and over the Gripper Block then in the mouth of Cutting Tube.

Care must be taken to push forward the end of the wire, only just to protrude beyond the mouth of the Cutting Tube. If it is pushed too forward, buckling may occur  due  to the end of the wire arriving at the Loop Bar before this is in the position to receive it.

SETTING FOR THICKNESS

According to the thickness of the job; the supply of wire can be adjusted from Feed Adjusting Screw. If short supply is needed then tight the adjusting screw.

If job is thick then loose the adjusting screw. Make sure that the Cutting Knife should not touch with the Former Driver when screw is to be tightened, and should not touch to the Cutter Slide when screw is to be loosed.

Thickness between former driver and Clinches Ram can be adjusted from Eccentric Adjuster by the graduation mark indicated on the Arm.

LUBRICATION

Do not neglect to lubricate both in the oil cups and in other obvious  places.  Remember that this is light and fast machine, Do not use heavy oil


Testimonials

We have been associated with them for over 15 years and they have been our trusted partners over all these years.

What has been most satisfying is the promptness and quality of after sales service and most importantly the ever-present smile.

We consider them not just our technology partners but a part of our family.

Boxman (India) Private Limited, Sonipat, NCR (National Capital Region)

Our association with them started 30 years ago with 'cutting machines'.

The machines speak for themselves in terms of quality.

It is with their continuous service support and providing the right knowledge that they have outstripped the competition in set up of our 'corrugated box unit' for inner and master cartons.

Moorthy offset Private Limited, Sivakasi (Tamil Nadu)

We started our journey in packaging industry 11 year ago. At that time, we had no idea who we should buy our machines from, so we landed up at their door. 

They guided us with their unbiased advice and with their guidance we ordered our first set of machines.  

As the years passed, we have tried other renowned names in the industry and have concluded that they are the ‘best’ at what they do.

Max Packers (Jalandhar, Punjab)

They have been amazing partners and extremely dependable.

This companionship of three decades has only been possible due to their endless efforts and amazing quality material provided to us.

We hope to extend this partnership for several decades to come.

Madhav Printographics Private Limited (formerly Shivalik Printers), NCR (National Capital Region)

We have been associated with them since 2014 with a combined Slotter scorer and from that day our association developed with them has grown with various installations.

We are proud to be their partners.

Fortuner Packaging (Group), Baddi, Himachal Pradesh

Mr Vinay gupta is synonyms with the brand and a vital part of our family at Pooja industries. जो कहता है वो करता है (A man of his words) .No false promises regarding quality and always guides costumers in the right direction.

We love you & will always be associated with your brand.

Pooja packaging industries, Haldwani (Nanital), Uk

We are glad to associated with you since 2010. Our entire plant has been set up by you

We look forward to partner with you for many years and decades to come.

Rajan Packers Group (Batala, Punjab)

They have been an institution, a brand and above all a commitment for us.

Buying a machine from them has always given us a sense of security that this machine will give us a quality product with production and no breakdowns.

Proud to have them as our associate partners in providing 'Complete Corrugation Solutions'

BP Lipeds, Baddi (Himachal Pradesh)

We are proud be install their corrugating and box making machinery at both units in Jodhpur and Churu Rajasthan and are extremely satisfied with their continued support to the BVS group. 

BVS Group (Jodhpur, Rajasthan)